MIG-250F Inverter MIG CO2/MAG welding equipment

1. MIG/MAG CO2 welder. 2. Inverter MIG welding equipment. 3. Internal wire feeder welding machinery.

IGBT inverter technology,current-mode control,reliable quality,stable performance.Closed loop feedback cpontrol,constant voltage output,fit for wide voltage range(±15%).Controlled by electronic reactor,stable welding performance,little splash,deep penetration,good welding bead.Slow wire feeding during arc starting,remove the tip ball after welding,easy arc-starting.Suitable for steel board with a thickness of more than 0.8mm.Small size,light weight,easy operation,economical and practical,stable welding can be realized at the current of 30A when using welding wire a diameter of 0.6mm,can be widely used in automobile,steel door&window,furniture and other industry.Cost-saving,can completely replace welder with taps.

1.     Rated input voltage(V) : AC 380V±15%

2.      Frequency(HZ): 50/60

3.     Rated input power capacity(KVA): 8.3

4.     Output no load voltage(V): 38

5.     Output current range(A): 50-250

6.     Voltage range(V): 140

7.    Welding Wire diameter(mm): 0.8-1.0

8.     Duty cycle: 60%

9.     Suited plate thickness(mm): 0.6-6.0

10.   Weight(kg): 15

11.   Dimension(mm): 480×204×303

MIG-250F Inverter MIG CO2/MAG welding equipment